15 Sep What CCTV Wiring Needs Before Installation

We try to get the cabling right the first time to save time and money and reduce disruption later.

Choose the Right Cable Type

Analogue cameras use coaxial cable whereas IP cameras use CAT5e or CAT6 Ethernet cable. Therefore it is crucial that you establish the type of camera system you are going to fit prior to purchasing cable as the type of cable required will affect the amount of cable you need to purchase.

Plan Routes Away From Mains Wiring

Interference can be caused by signal cable being run near mains wiring. Plotting cable runs prior to installation will highlight any potential problems and help to maintain a good signal. Cable should be run at least 150mm away from power cables.

Locate Your DVR or NVR Centrally For CCTV Installation Gloucester, see apmfireandsecurity.com/cctv-installation/cctv-installation-gloucester/.

Your recorder must be fixed in a secure location, ideally in a well ventilated area and close to a power socket. For CCTV Installation Gloucester, a local engineer can offer advice on where to put your recorder to keep cable runs to a minimum.

Weatherproof Any Outdoor Runs

Ensure exterior runs of cable are weatherproofed using suitable cable within UV stable conduit. Note whether external walls are of brick, render or timber construction as this will affect method of chasings or use of cable fixings.

Confirm Your Data Protection Obligations

Get a grip on your Data Protection obligations before your new system goes live. This includes signage, storage limits and access rights. You can find more information on UK GDPR for CCTV here.